ADVANTAGES

• Rebuilds worn engine metal and reverses metal wear
• Restores lost compression in cylinders
• Improves engine power and acceleration
• Reduces fuel consumption
• Restores oil pressure
• Can double or triple the life of an engine
• Protects against damage from cold starts
• Decreases toxic carbon monoxide and dioxide emissions

APPLICATION INSTRUCTIONS

• Make sure the automobile engine is warmed up to normal operating temperature.
• Turn off the vehicle.
• Insure the tube is at room temperature so that contents flow freely.
• Empty contents of the tube into the engine oil reservoir.
• Start the car and let the engine idle for five minutes. Then drive as you normally would. It takes 600 to 900 miles to complete the Revitalization cycle, during which changing oil is NOT recommended.

*Granules of Revitalizant completely dissolve in motor oil at normal operating temperature.

*1 tube treats car engine with an oil capacity of 10 quarts of oil. Additional treatments are necessary for larger engines with higher oil capacities. As a general rule, use one tube of 1-Stage for every 10 quarts of oil.

NOTE

• 1 Stage Engine Revitalizant works in all gasoline-powered,natural-gas, and diesel engines of passenger cars and small trucks and 4-stroke motorcycles with oil system up to 10 Quarts
• Can be combined with all types of motor oils, from full synthetic to mineral oils
• It takes 600 to 900 miles to complete the Revitalization cycle, during which changing oil is NOT recommended
• Repeated application of 1 Stage Engine Revitalizant is recommended after 62,000 miles.