ADVANTAGES

Restores mobility of stuck piston rings
Reduces oil consumption
Cleans cylinders and pistons, combustion chambers and valves from any kind of contamination (scale, carbon, varnish, tar)
Equalizers compression in cylinders
Decreases noise while engine operating
Removes deposits from spark-plugs.
Reduces exhaust level into the atmosphere

APPLICATION

Warm up the engine. It should be warmed but not hot Unscrew the spark plugs. Disconnect ignition timing sensor, Hall device and commutator.
Spray the content (for 5 sec) into each cylinder alternately through a nozzle hose.
Screw the plugs back in. Wait for 10-20 minutes. Unscrew the plugs. Cover the plug holes with absorbing fabric to avoid dirt flying-out and getting onto the paint. Rotate the engine with the starter for several seconds
Place the spark plugs into their position
Start the engine and run it at moderate rpm for up to 15 minutes. During this period softened remains of carbon will be removed through the exhaust system.

NOTES

Avoid getting the substance onto lacquer coating.
Safe for catalytic neutralizers, oxygen sensors, mechanical rubber goods and seals.